User guide

4-2 EtherNet/IP Communications Module
4.2 Using the LCD OIM or CopyCat
Keypad to Configure the Module
Use the procedure in figure 4.1 to access the parameters on the
EtherNet/IP module using the LCD OIM. If you are unfamiliar with
the operation of the LCD OIM, refer to the MD65 AC Drive User
Manual (D2-3519) for more information.
Table 4.2– Using the LCD OIM or CopyCat Keypad
Step Key(s) Example Screens
1. Power up the drive.
Plug the OIM or
CopyCat Keypad into
the drive. The
Parameters menu for
the drive will be
displayed.
2. Press Sel key once to
display the Device
Select menu.
3. Press Enter to display
the MDI Devices
menu. Press Down
Arrow to scroll to
MDCOMM-ENET.
and
Parameters
Groups
Linear List
Changed Params
DIAG PA RA M DSEL MEM SEL
Sel
Device Selected
MDI Devices
DIAG PARAM DSEL MEM SEL
MDI Devices
MD65
MDCOMM-ENET