Manual

C-2 PMI Regulator
Resolver & Drive I/O Board
Description Register Bit
Resolver scan position data 215/1215
Resolver strobe position 216/1216
Enable external strobe 101/1101 8
Enable external strobe falling edge 101/1101 9
External strobe detected 201/1201 8
External strobe level 201/1201 9
Enable resolver balance calibration test 101/1101 6
Resolver gain calibration test complete 201/1201 6
Resolver balance calibration test complete 201/1201 7
Tuning aborted 203/1203 5
Analog input data 214/1214
Drive I/O control 101/1101
Drive I/O status 201/1201
Resolver fault 202/1202 9
FDBK OK LED
Resolver broken wire 202/1202 8
RPI LED
RPI input 201/1201 0
MCR LED
N/A N/A N/A
AUX IN1 LED
Aux input 1/MFDBK 201/1201 1
AUX IN2 LED
Aux input 2 201/1201 2
AUX IN3 LED
Aux input 3 201/1201 3
AUX IN4 LED
Aux input 4 201/1201 4
AUX IN5 LED
Aux input 5 201/1201 5
AUX OUT LED
Aux output 101/1101 4