Installation manual

Publication 1747-RM001G-EN-P - November 2008
SLC Communication Instructions 12-17
• Local Bridge Addr (dec)/(oct)
(1) (2)
Specifies the node number of the bridge device on the local network.
Refer to page 12-16 for the valid range of addresses.
• Remote Bridge Addr (dec)
(1)
Specifies the node number of the bridge device on the bridging network,
when the bridge is configured for gateway mode. Otherwise, leave at 0.
• Remote Station Addr (dec)
(1)
Specifies the node number of the target device on the remote network.
Refer to page 12-16 for the valid range of addresses.
• Remote Bridge Link ID
(1)
Specifies the link ID of the remote network where the target device
resides. Valid range is 0 to 255.
Parameters for Target Device (Modbus RTU)
(1)
Remote MSG only.
(2)
All processors except SLC 5/05 Channel 1.