Installation manual

Publication 1747-RM001G-EN-P - November 2008
14-14 SLC Passthru Communications
4. When you run RSWho on that passthru processor network, the SLC
5/03, 5/04, or 5/05 passthru processor should appear with a ‘+’ sign to
the left of its icon as shown below:
Figure 14.1 SLC 5/04 Passthru Processor on RSWho
5. Click on the ‘+’ sign and verify that a Channel 0, DF1 network appears
below the SLC 5/04 (or SLC 5/03 or 5/05), as shown below:
Figure 14.2 Channel 0, DF1 Network
Before browsing this Channel 0 DF1 network, you should configure RSWho
to only browse the range of remote node addresses that you expect to find.
You should also limit RSWho to browse only one node at a time. To
accomplish this, right click on the Shortcut DF1 network and select properties.