Installation manual

Publication 1747-RM001G-EN-P - November 2008
B-4 SLC Status File
Status File Details
Conventions Used in the Displays
The following tables describe the status file functions, beginning at address S:0
and ending at address S:163. A bullet (•) indicates that the function applies to
the specified processor.
The following classifications are used:
• Status - Use these words, bytes, or bits to monitor processor options or
processor status information. The information is seldom written to the
user program or programming device (unless you want to reset or clear a
function such as a minor error bit).
• Dynamic Configuration - Use these words, bytes, or bits to select
processor options while in the RUN mode.
• Static Configuration - Use these words, bytes, or bits to select
processor options prior to entering the RUN mode. Note that some
options must be selected while in the offline program mode, prior to
restoring the user program.
S:54 Last Major Error Fault Code SLC 5/03 and
higher
B-57
S:55 Last DII ISR Scan Time B-57
S:56 Maximum DII ISR Scan Time B-57
S:57 Operating System Catalog Number B-57
S:58 Operating System Series B-57
S:59 Operating System FRN B-57
S:60 Processor Catalog Number B-57
S:61 Processor Series B-58
S:62 Processor Revision B-58
S:63 User Program Type B-58
S:64 User Program Functionality Index B-58
S:65 User RAM Size B-58
S:66 Flash EEPROM Size B-58
S:67 to S:82 Channel 0 Active Node Table B-58
S:83 to S:86 Channel 1 Active Node Table SLC 5/04 B-59
S:87 to S:98 Reserved B-59
S:99 Global Status Word B-59
S:100 to S:163 Global Status File B-59
Table B.1 Status File Location (Continued)
Word Function Applies To Page