Installation manual

Publication 1747-RM001G-EN-P - November 2008

B-10 SLC Status File

S:1/12 Static Config

(See table on

page B-60 for all

setting

combinations.)

Load Memory Module and Run Bit

With this bit, you can overwrite a processor program with a

memory module program by cycling processor power. A

programming device is not required. The processor will

attempt to enter the REM Run mode, regardless of what mode

was in effect before cycling power:

••••

•••

Table B.2 Status File Functions (Continued)

Address Classification Description Fixed

5/01

5/02 5/03 5/04 5/05

Mode before Powerdown Mode after Powerup

REM Test/Rem Program

REM Run/Rem Fault

REM Idle/Rem Download

REM Run

Mode before Powerdown Mode after Powerup

(same keyswitch position)

Run

Idle

Program/Download

Fault after Run

Fault after Program

RUN

Run

PROGram

RUN

PROGram