Installation manual

Publication 1747-RM001G-EN-P - November 2008
Index 3
how counters work 2-13
CRC 13-52, 13-58, 13-66, 13-72, 13-80
creating data for indexed addresses
E-11
crossing file boundaries E-11, E-15
current/last 10 ms scan time B-19
D
data file organization and addressing
1-2, E-1
bit file 1-3
bit shift instructions E-16
control file 1-5
creating data for indexed addresses
E-11
crossing file boundaries E-11, E-15
data file types E-3
data files
ASCII file
10-3
string file 10-3
effects of program interrupt on S24 E-14
file copy and file fill instructions E-17
file indicator (#) E-15
file instructions E-13
floating point file 4-4
integer file 1-10, 1-11
monitoring indexed addresses E-13
outputs and inputs 1-2
sequencer instructions E-17
status file 1-3
data file types E-3
ASCII data file 10-3
bit data file 1-3
control data file 1-5
floating point data file 4-4
input data file 1-2
integer data file 1-10, 1-11
output data file 1-2
string data file 10-3
data files E-2
organization E-2
types
file indicator (#)
E-15
data handling instructions
Convert to BCD (TOD)
5-2
Decode (DCD) 5-10
Encode (ENC) 5-11
Encode 1 of 16 to 4 (ENC) 5-11
FIFO and LIFO instructions
overview
5-25
Fill File (FLL) 5-14
Radian to Degrees (DEG) 5-8
Data Highway Plus communication
protocol
13-10
global status word overview 13-18
transmit enable bit 13-19
transmit receive bit 13-20
using the SLC 5/04 processors 13-22
Day-of-Week B-57
Decode (DCD) 5-10
data handling instruction 5-10
DeviceNet Explicit Message (DEM)
12-52
DeviceNet Passthru 14-2
DF1 full-duplex driver 13-50, 13-51,
13-79
DF1 half-duplex driver 13-66, 13-71
DF1 Radio Modem Communications
13-76
configuring channel 0 13-78
DH+ active node table enable bit B-51
DH+ active nodes channel 1 B-59
DH-485 active nodes channel 0 B-58
DH-485 communication protocol
DH-485 network initialization
13-5
DH-485 token rotation 13-4
DH-485 communications servicing
selection bit
B-18
DH-485 incoming command pending bit
B-15
DH-485 message reply pending bit B-15
DH-485 outgoing message command
pending bit
B-15
diagnostic file 13-58, 13-66, 13-71
SLC 5/03, 5/04, and 5/05 13-51, 13-79
DII accumulator B-56
DII enable bit B-16
DII executing bit B-16
DII lost B-53
DII overflow bit B-24
DII pending bit B-16
direct addressing D-1
Discrete Input Interrupt (DII) 11-18
application example 11-25
basic programming procedure 11-18
File Number B-55
interrupt latency and interrupt
occurrences
11-21
interrupt priorities 11-22
operation 11-19
counter mode 11-19
event mode 11-20
reconfigurability 11-22