Installation manual

Publication 1747-RM001G-EN-P - November 2008
8 Index
remote station address 15-2
reserved B-6, B-22, B-23, B-53, B-59
Reset (RES) 2-20
Retentive Timer (RTO)
using status bits
2-12
retries
SLC 5/03, 5/04, and 5/05
13-59, 13-67,
13-73
Return (RET) 6-3
nesting subroutine files 6-4
using 6-5
Return from Subroutine (RET) 6-5
program flow instruction 6-5
RIO Block Transfer Overview 8-2
RTS off delay 13-59, 13-67, 13-72, 13-89
RTS send delay 13-59, 13-67, 13-72,
13-89
runtime errors 16-6
S
saved with single step test enabled bit
B-14
Scale Data (SCL) 4-15
math instruction 4-15
Scale with Parameters
math instruction
4-13
Scale with Parameters (SCP) 4-13
scan time timebase selection B-50
scan toggle bit B-48
Selectable Timed Disable (STD) 11-16
interrupt instruction 11-16
selectable timed interrupt 11-8
basic programming procedure 11-8
enable bit B-14
executing bit B-14
file number B-45
interrupt latency and interrupt
occurrences
11-9
interrupt priorities 11-11
operation 11-9
overflow bit B-23
pending bit B-13
Selectable Timed Disable (STD) 11-16
setpoint B-45
subroutine content 11-9
selection status (channel 0) B-47
sequencer instructions E-17
entering parameters for SQL 7-12
entering parameters for SQO and SQC
7-6
overview
effects on index register
7-5
Sequencer Load (SQL) 7-12
Sequencer Output (SQO)
operation
7-8
Sequencer Load (SQL) 7-12
application specific instruction 7-12
Service Communications (SVC) 12-3
communication instruction (5/02 only)
12-3
sign bit B-6
Sine (SIN) 4-32
math instruction 4-32
SLC 5/03, 5/04, and 5/05
Active stations, monitoring
13-63
Channel Status 13-68
Configuring
Channel 0 Poll Timeout
13-73
DF1 Half-Duplex Master - Mes-
sage-based
13-63
DF1 Half-Duplex Master - Standard
Mode
13-56
Point-to-point 13-7, 13-12, 13-24
DF1 Full-Duplex
Channel Status
13-9, 13-13,
13-28, 13-53, 13-81
SLC 5/05 passthru examples 15-18
Square Root (SQR) 4-12
math instruction 4-12
startup protection fault bit B-7
Station address
SLC 5/03, 5/04, and 5/05
13-58, 13-66,
13-71
station list
viewing
13-63
status data file E-3
status file B-1
conventions used in the displays B-4
STI lost B-53
STI resolution selection bit B-16
String Concatenate (ACN) 10-11
ASCII instruction 10-11
string file 10-3
String Search (ASC) 10-18
ASCII instruction 10-18
Subroutine (SBR) 6-3
nesting subroutine files 6-4
using 6-5
Subtract (SUB) 4-5
math instruction 4-5
Swap (SWP) 4-28
math instruction 4-28