User's Manual

ROCKWELL COLLINS
COMPONENT MAINTENANCE MANUAL with IPL
TDR-94, PART NO 622-9352
MAINTENANCE AID/SCHEMATIC CHANGES
REVISION
IDENT
(SHEET)
DESCRIPTION OF REVISION A ND CAUSE FOR CHANGE
SERVICE
BULLETIN
EFFECTIVITY
MARKING
N/A First production. REV B
N/A Relocated R302. REV C
D (2) Added L201 and L202; deleted W203 and W206 to correct
false power monitor indicator.
REV D
N/A Production assembly change only. REV E
F (2) Changed value of R302 and R303 to test selects so units with
lower than normal receiver gain can be adjusted.
REV F
N/A Data change only. REV G
N/A Changed conductive adhesive from 005-1021-010 to
005-0721-000.
REV H
J (1) Added R108 and R109 (20 ohms) and changed C132 from
0.056 to 0.01 wF to improve spectrum.
REV J
N/A Changed CR201 and CR207 part numbers; earlier parts are
not procurable.
REV K
N/A Added sleeving to U101 lead to prevent shorting to chassis. REV L
N/A Changed Q102, L305, and L306 part numbers; earlier parts
are not procurable.
REV M
N (2) Added C318, C319, and R312 to help the receiver pass the
side-lobe suppression test.
REV N
N/A Change
d U301 and U304 part numbers; earlier parts are not
procurable.
REV P
N/A Data change only. REV R
T (1) Changed Q102 from type SD1802 to 23A008. REV T
U (2) Replaced diodes CR203 thru CR206 with a more robust part. REV U
N/A Production process change only. REV V
N/A Internal documentation change only. REV W and Y
AA (1) Changed Q102 from 23A008 to SD1802. Changed Q105 from
MRF10500 to MRF10502.
REV AA
Power Amplifier Circuit Card A2 (CPN 687-0722-003), Maintenance Aid and Schematic Changes
Table 2005/Table 34-50-96-99A-016-A01
34-50-96
Page 2023/2024
May 18/06