Switch User Manual
Table Of Contents
- 1783-UM002C-EN-E, Stratix 8000 Ethernet Managed Switches Hardware User Manual
- Preface
- Table of Contents
- 1 - Start
- 2 - Install the Switch
- Installation Guidelines
- Before You Begin
- Verify Package Contents
- Add Modules to the Switch
- Install the Switch
- Install or Remove the CompactFlash Card
- Set Up the Switch Initially with Express Setup
- Configure and Manage the Switch
- Reset the Switch to Factory Defaults
- Connect to the Switch Ports
- Verify Port Connectivity
- Verify Switch Operation
- Connect a Computer or a Terminal to the Console Port
- Run a Power-on Self-test (POST)
- Verify POST Results
- Disconnect Power
- Install and Remove SFP Modules
- Connect to SFP Modules
- 3 - Troubleshoot the Switch
- 4 - Cable and Connectors
- Index
- Back Cover
Publication 1783-UM002C-EN-P - April 2009 85
T
terminal-emulation software 62
troubleshooting
bad or damaged cable
70
connection problems
70
diagnosing problems
69
Ethernet and fiber cables
71
link status
72
port and interface settings
73
POST
69
speed, duplex, and autonegotiation
73
switch performance
73
understanding POST results
69
V
verifying package contents 26
verifying switch operation
62, 64
W
warnings
functional ground lug
22
hazardous locations
console cable
12, 62
industrial environment
23
installation
23
supply wires
23
wiring the relays
44, 45