4-1/2" Compact Circular Saw PAGe 4 ENG SIERRA CIRCULAR COMPACTA DE 4 1/2" PAGe 12 ESP SCIE CIRCULAIRE COMPACTE DE 11.
Thank you for purchasing a ROCKWELL® power tool. We are confident that you will appreciate the quality of the product and you will be entirely satisfied with your purchase. Please read carefully the user safety and operating instructions on how to operate this product correctly within safety norms and regulations. Gracias por su compra de un producto ROCKWELL®. Estamos seguros de que apreciará la calidad del producto y de que estará completamente satisfecho con su compra.
RK3441K 8 1 2 3 10 4 9 18 5 11 16 6 12 7 17 A C2 14 13 19 15 B D C1
-1/2" Compact Circular Saw COMPONENT LIST 1 Lock Off Button 2 Soft Grip Handle 3 Hex Key 4 On/Off Switch 5 Spindle lock button 6 Lower blade guard 7 Lower guard lever 8 Fixed upper guard 9 Dust extraction outlet 10 Vacuum adapter 11 Depth adjustment lever 12 Base plate 13 Saw blade 14 Inner flange 4 15 Blade bolt 16 Parallel guide 17 Parallel guide clamping fixture 18 Bevel adjustment lever 19 Outer flange ENG
4-1/2" Compact Circular Saw ACCESSORIES TCT Blade: 24T for wood (RW9281) Parallel guide Vacuum Adaptor: 7/8" inner dia. 1-1/4" outside dia. Hex key 1 1 1 1 We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
4-1/2" Compact Circular Saw f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
4-1/2" Compact Circular Saw c) Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece. d) Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable platform. It is important to support the work properly to minimize body exposure, blade binding, or loss of control.
4-1/2" Compact Circular Saw b) Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris. ENG Symbols To reduce the risk of injury, user must read instruction manual c) Lower guard may be retracted manually only for special cuts such as "plunge cuts" and "compound cuts.
4-1/2" Compact Circular Saw Technical data Voltage 120 V ~ 60 Hz Rated current 5A No load speed 3500/min Blade size 4-1/2˝x3/8˝x24T Cutting capacity Cutting Depth at 90° 1-11/16˝ Cutting Depth at 45° 1-1/8˝ Arbor size 3/8˝ Recommended maximum material thickness Wood 1-11/16˝ Aluminum 1/10˝ PVC pipe (diameter) 1-5/8˝ Tile 15/32˝ Sheet steel 1/50˝ Protection class /II Bare tool weight 5 lbs OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully.
4-1/2" Compact Circular Saw degrees is marked with a notch on the front of the base plate (12). The base plate (12) must always be held firmly against the material being cut to reduce saw vibration, blade jumping, or blade breakage. MAKING RIP CUTS Always use a guide when making long rip cuts with your saw. You can use any suitable straight edge clamped to the work or the parallel guide that is included with your saw. 6. SAWDUST REMOVAL (See Fig.
4-1/2" Compact Circular Saw ENG TROUBLESHOOTING Symptom Possible Causes Possible Solution Tool will not start when operating the on/off switch. Power cord not plugged in. Power cord is broken. Carbon brush has worn down. Check to make sure power cord is connected well into a working outlet. Unplug the power cord. Replace it using a qualified maintenance person. Replace the carbon brush using a qualified maintenance person. Cutting depth is less than that is set.
