Operating instructions

9
SoniCrafter
®
ENG
SYMBOLS TECHNICAL DATA
Model RK5100K RK5100K.1 RK5101K RK5102K
Rated
voltage
120 V~60 Hz
Rated
current
2.3 A
Oscillations
speed
20000 /min 11000-20000 /min
Oscillations
angle
3.2 °
Protection
class
/II
Weight 2.8 Lbs
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
1. MOUNTING ACCESSORIES (See A1 A2)
CAUTION: For all work or when changing
application tools, always wear protective gloves.
Avoid danger of injury from the sharp edges of the
application tools. Application tools can become very
hot while working, presenting danger of burns!
WARNING: To reduce the risk of injury, do not let
the end cut blades or any saw blades face back
toward the user’s hand.
Unscrew the bolt (8) and remove the ange (9).
Clean the tool holder, the application tool and the bolt
(8) and ange (9).
Place the application tool exactly onto the hex-shaped
tool holder. Note that the application tool has a ush t.
Reposition the ange and tighten the bolt (8) using the
supplied Allen key.
2. ADAPTER(23)(See F )
Accessories of other brands( Fein
®
, Bosch
®
, and
Dremel
®
) can be tted onto the SoniCrafter
®
brand tool
using the adapter.
NOTE: Fein is a registered trademark of C. & E. Fein
GmbH. Bosch is a registered trademark of Robert
Bosch GmbH. Dremel is a registered trademark of
Credo Technology Corporation.
To reduce the risk of injury, user must read
instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation