Use and Care Manual

3.0A OSCILLATING TOOL ENG
9
APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Universal Fit
TM
accessories available from Rockwell
Accessories work with other competitive tools.
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade,
rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
Pic Name Application
Sawing
Bi-Metal Metal/Wood End Cut
Blade
Wood, plastic, fiberglass, nails, non-ferrous
metals, thin sheet metal, hardened fillers.
Standard Wood End Cut Blade Wood, plastic, drywall.
Precision Wood Cut Blade Wood, soft plastics.
HSS Semicircle Saw Blade
Thin wood, plastic, fiberglass,
non-ferrous metals, thin sheet metal,
hardened fillers, window glazing.
Sanding
Sanding Pad (Perforated) Wood, plastic, hardened fillers.
Sanding Finger Pad Wood, plastic, hardened fillers.
Rasping
Triangular Carbide Grit Rasp
Wood, hardened adhesives, thin set,
masonry.
Carbide Rasp (Finger Shaped)
Wood, hardened adhesives, thin set,
masonry.
Removing
grout
Carbide Grit Semicircle Saw
Blade
Grout, porous concrete, masonry.
Diamond-Coated Semicircle
Saw Blade
Ceramic and stone tile, backerboard.
Scraping
Rigid Scraper Blade
Old paint, hardened adhesives, caulk, carpet.
Flexible Scraper Blade
Elastic sealants, paint, adhesive residues,
carpet.