Use and Care Manual

OSCILLATING TOOL ENG
7
SYMBOLS TECHNICAL DATA
RK5132K RK5142K
Rated voltage 120 V ~ 60 Hz
Amps 3.5 A 4.0 A
Oscillations speed 11000-20000/min
Oscillations angle 4° 5°
Protection class
/II
Tool weight (without
power cable)
2.9 lbs 3.3 lbs
ACCESSORIES
RK5132K RK5142K
Smaller flange (For other
brands’ sanding pads)
1 1
1-3/8˝ Wood End Cut Blade 2 1
1-3/8˝ Precision Wood Cut
Blade
/ 1
3-1/8˝ HSS semicircle saw
blade
1 1
40# Sanding sheet
(perforated)
10 10
80# Sanding sheet
(perforated)
8 8
120# Sanding sheet
(perforated)
8 8
Sanding pad 1 1
Rigid Scraping Blade / 1
Only use the appropriate accessories intended for this
tool. Accessory information can be found on the product
packaging, at a ROCKWELL dealer or on our website at
www.rockwelltools.com.
To reduce the risk of injury, user must
read instruction manual
Warning
Double insulation
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves
Avoid danger of injury from the sharp
edges of the accessories.
Accessories can become very hot while
working, presenting danger of burns!
Make sure the battery is removed prior
to changing accessories.
Before working with your tool make sure
that no power cords will be damaged.
High oscillation frequency.
Low oscillation frequency.