Instruction Manual

ManualsBrandsRocky Mountain Radar ManualsCarRMR-RS202

The RMR-RS202 laser-radar scrambler is

the latest in scrambling technology

 FCC legal (not legal in UT, CA, MN, OK, NE, CO, VA or DC.)

 Disables X, K, and Ka bands

 Disables all LASER units

 One-year ticket rebate program*

 Remote application installs externally

 Weatherproof unit

 Built-in dual diagnostics

 Self contained unit no maintenance

 Compact size 4.5 x 2.25 x 2.0

 1-year warranty

* Registration Required, US only

Summary of content (8 pages)

PAGE 1
The RMR-RS202 laser-radar scrambler is the latest in scrambling technology  FCC legal (not legal in UT, CA, MN, OK, NE, CO, VA or DC.)  Disables X, K, and Ka bands  Disables all LASER units  One-year ticket rebate program*  Remote application installs externally  Weatherproof unit  Built-in dual diagnostics  Self contained unit no maintenance  Compact size 4.5 x 2.25 x 2.
PAGE 2
DOES IT REALLY WORK? HERE’S WHAT THE EXPERTS SAY “From the body of test data taken during the road tests it is clear that use of these passive scramblers does reduce the range at which police radar units can acquire and/or maintain lock (give consistent and accurate speed reading) and that this effectiveness can be measured.” -R. Delyser, PhD, U.
PAGE 3
HOW DOES IT WORK? The RMR-RS202 is a passive radar scrambler. It has an FM chirp, a mixer, and antenna for all three radar bands – X, K, Ka. Radar: When the RMR-RS202 receives the radar signal, it mixes the signal with an FM chirp then reflects it back to the radar where the added chirp confuses the computer inside the radar gun causing the screen to remain blank. The RMR-RS202 will not scramble the roadside trailer signs because they do not have a sampling computer.
PAGE 4
HOW IS THIS LEGAL? The RMR-RS202 conforms to all federal regulations. Part 15 of the FCC code regulates consumer products that may transmit or leak radio frequency energy into the atmosphere. Since the RMR-RS202 is not a transmitter, we can disregard the sections on transmitters. The RMR-RS202 is a reflective receiver. It receives the police signal and reflects it back to the radar gun. Part 15 also controls the levels of radio frequency leakage from products designed to comply with this statute.
PAGE 5
INSTALLATION & OPERATING INSTRUCTIONS 1) It is very important that the RMR-RS202 is mounted properly for optimum performance. 2) Please read these instructions before starting your installation. 3) Determine the best location for the RMR-RS202. For optimum performance install the RMR-RS202 on a flat surface around the front license plate area with a clear view of the road. 4) Apply the supplied double sided tape to the RMR-RS202 on the backside.
PAGE 6
5) Clean thoroughly the surface area where the RMRRS202 will be placed using rubbing alcohol. 6) Peel off remaining side of double sided tape and apply RMR-RS202 to vehicle. Make sure the cable connector is facing down. 7) Do not drill any holes on RMR-RS202. 8) Keep front lens clean and free of debris. Connecting your RMR-RS202 For installation with an RMR-8RD 1) Route RMR-RS202 cable through vehicle keeping away from moving parts and hot surfaces.
PAGE 7
This unit is guaranteed by the manufacturer against defects in workmanship and materials for 1 year from the purchase date. If you have any difficulties with the RMR-RS202, the unit will be repaired or replaced by the factory at no charge. Returns should be sent freight prepaid with an explanation of the problem, your physical address (no PO Boxes), proof of purchase, and telephone number.
PAGE 8
RMR-RS202 Radar and Laser Scrambler Owners Manual “You can’t catch what you can’t see” ™