User Manual

5
below the rear view mirror. Make sure the unit has an
unobstructed view of the road. Then Press firmly to seat
suction cups. Note: Tinted glass will degrade the laser
performance. Unit must be placed above windshield wipers
to avoid undesired interference.
4.) Carefully bend the windshield bracket mount to a level
position.
5.) Insert the small end of the power cord gently into the
power jack on the right side of the unit and the large end into
the cigarette lighter receptacle.
Remote-mounting is not recommended
Hardwire: Remove cigarette lighter plug. Connect the red
wire to +12 Volts, and connect the white wire to ground.