User manual

ARCTICROC 2T – 2Bay RAID System - User Manual Page | 17
CONNECTING THE RAID SYSTEM TO A COMPUTER
Complete the following steps to connect the RAID System to a host computer.
The RAID System should only be connected to a host computer via one interface.
Connection of the system to a computer via two or more interfaces simultaneously is
not recommended.
Connect the AC/DC power adapter.
eSATA
DC IN
RAID
Insert both ends of the USB 2.0, eSATA, FireWire 400, or FireWire 800 cable(s) into the
corresponding port of the RAID System and the host. Use only ONE cable.
eSATA
DC IN
RAID
It is highly recommended to select only one interface to do data transfer.