User Manual

QUICK INSTALLATION
How to Connect the Interface Cables - Connecting the Drive
Connecting the Drive
1. Insert the digital key (key-token) in the back of the Hawker LX for authentication First.
Connecting via SATA port:
2. Connect one end of the SATA cable to the SATA ports of your computer and then the other
end to the SATA port in the HAWKER LX device.
NOTE: eSATA port does not provide power to the drive. Therefore you must connect the SATA
cable FIRST, and then connect the USB Cable to power the drive. If USB is connected first, the
computer will read the device as USB and not as SATA.
Connecting via USB port:
3. Using the one ends of the USB cable, connect them to the corresponding USB port of your
computer (or via Power Hub that is connected to your computer) and the other end to the USB
port in the HAWKER LX. After a few seconds, the light will turn blue and a Rocstor HD icon will
show on “My Computer” folder under the Windows OS.
ROCSTOR | ROCSECURE | HAWKER HX user manual Page | 11