store your future EAGLEROC E3 User Manual
TABLE OF CONTENTS IMPORTANT NOTICES • Safety Notices ________________________________________________________ • General Notices • Capacity Disclaimer____________________________________________________ • Care and Handling 4 4 4 4 GENERAL • Introduction ___ ________________________________________________ • Box Contents • Minimum System Requirements _____________________________________ • Connectors and Eagleroc rear view 6 6 6 7 7 QUICK INSTALLATION 8 • How to Connect the Interface Cables - Connecting t
TROUBLESHOOTING 32 • Troubleshooting for Macintosh computers _________________________________ 32 • Troubleshooting for PC Windows based computers 34 KNOWLEDGE BASE 36 • Eagleroc E3 Unique Features ________________________________________ 36 • Specifications 37 • Introduction to Interfaces (ports) and Cables ________________________________ 38 o FireWire (IEEE 1394) 38 o USB (Universal Serial Bus) ____________________________________________ 40 o SATA (Serial Advanced Technology Attachment) 41 o Comparison
IMPORTANT NOTICES Safety Notices • • • • • The warranty is void if an unauthorized person attempts and/or repairs the hard disk drive. Read all Manuals and instructions carefully before using the device. Do not spill any liquid or insert any object into the device. Use the device within the specifications indicated, including but not limited to: power requirements, temperature, humidity, sunlight and magnetism from other devices such as computers and televisions. Please visit the Rocstor website, www.
• Do not spill any liquid or insert any object into the device. • Do not attempt to disassemble and service the Eagleroc drive during the warranty period. • Please read the Safety Notices and Limited Warranty information in this Manual and on the Rocstor website (www.rocstor.com) for further details.
GENERAL Introduction EAGLEROC E3 –USB (1.1/2.0) The Eagleroc E3 external SATA Hard Drives delivers extraordinary performance and reliability for both Mac and PC users. Eagleroc E3 contains a fast SATA high capacity 3.5” drive in a stylish and unique case that can be placed horizontally or mounted vertically on its stand. With its fan-less and quiet operation, the Eagleroc can be easily moved from one desktop environment to another. Choose Rocstor drives and “store your future.
Minimum System Requirements Mac Users: Window Users: Hardware: USB (1.1 or 2.0) port(s.) Hardware: USB (1.1 or 2.0) port(s.) Mac: PowerPC or Intel processor running Mac OS 9, X, Leopard, Snow Leopard Operating Systems: Microsoft Windows 2000, Me, XP, Vista, Windows 7 Recommended memory: 512 MB RAM Recommended memory: 512 MB RAM Connectors • • USB 2.
QUICK INSTALLATION 1. Turn ON your computer and wait until it fully boots up to load all programs. 2. Connect one end of the Adaptor cord directly to the Eagleroc and the other end to an AC outlet, surge protector or battery Backup (UPS). 3. Connect one end of the USB cable to the USB port of your computer (or via Power Hub that is connected to your computer) and then the other end to the USB port in the Eagleroc E3. 4.
5. The Hard drive is preformatted for Plug-and-Play operation. After a few seconds a Rocstor HD icon will show on “My Computer” folder under the Windows OS. Under the Mac OS, the Rocport HD will appear on the “Desktop.” 6. Click (double click) on the Rocstor HD icon to access the drive.
7. Cable Types USB supports three data transfer rates: • USB 2.0: A Hi-Speed (USB 2.0) rate of 480 Mbits/s (60 MB/sec) • USB 1.1: A Full Speed rate of 12 Mbits/s (1.5 MB/sec) • USB 1.0: A Low Speed rate of 1.
INSTALLING YOUR DRIVE All Rocstor hard drives are formatted as blank FAT32 (32-bit file allocation table) volumes {unless otherwise stated on the box} that are compatible with most modern Windows and Macintosh operating systems. To begin using your Rocstor drive, simply connect a data cable and power cord. There’s no need to shut down your computer because your Rocstor drive is hot-pluggable. Just plug it in and it’s ready to use.
erase or reformat the drive if needed. For example, Windows users may want to reformat the drive as an NTFS (new technology file system) volume, or Mac OS X users may wish to reformat the drive as a Mac OS Extended (Journal) or UFS (Unix file system) volume. Please note that all of your data will be lost if the volume (Hard Drive) is formatted or reformatted. Reformatting via PC (Window based computers) Right-click the Eagleroc drive in the “My Computer” folder, then choose Format.
PARTITIONING AND FORMATTING THE EAGLEROC DRIVE ON A MAC OS All Rocstor drives are factory formatted with FAT32, unless otherwise stated on the box. WARNING: Formatting and Partitioning the Eagleroc Drive will destroy all of its data. To protect your data, back it up before formatting or partitioning this device. IMPORTANT NOTES: 1. 2. 3. 4. 5. All programs should be closed before beginning. Connect the Rocstor hard disk drive adaptor to the drive and the other end plug into electricity.
INSTRUCTIONS FOR PARTITIONING AND FORMATTING FROM FAT32 to HFS+: 1. 2. Connect the Rocstor drive to the computer via a port. The drive will appear as an icon on the Desktop on the middle right side. The icon will represent the method of connection “USB.” Note: If the Hard Drive is connected via USB port, the desktop would indicate the USB “Macintosh HD” icon. The same procedures would also apply to the following steps.
3. Once the icon appears on the “Desktop” click on the “Macintosh HD” icon. 4. In the “Macintosh HD” menu, click on the “Applications” icon.
5. In the “Applications” menu, click on the “Utilities” icon. 6. In the “Utilities” menu, click on the “Disk Utility” icon.
7. On the left side of the “Disk Utility” menu is a list of available drives. One will be the Rocstor drive. Click on the icon showing the disk capacity. 8. You are now in the Rocport menu. Click on the “Partition” tab and then click the “Current” tab under “Volume ume Scheme.” A drop down “Partition” menu will appear. In the “Partition” menu, you may select any number of partitions available under “Volume Scheme.” If you are using Panther proceed to #13 below. 9. 10.
11. If you are using Tiger, click on Options on the lower center of the window. Select the Partition Scheme for your Rocstor drive. Suggest you select “Apple Partition Map” then click OK. 12. Volume Information: select a name for your drive.
13. Format: Click on either the “Format” area or the Blue up/down arrows. Select Mac OS extended (journal). 14. After selecting the type of format, click the “Partition” tab in the lower right of the screen. On the next screen, Partition Disk, click “Partition” again.
15. The drive will begin to format and upon completion; the same icon that first appeared on the Desktop will reappear with your designed name on the Desktop. 16. You can now Exit or close to return to the desktop desktop.
PARTITIONING AND FORMATTING THE EAGLEROC DRIVE ON WINDOWS All Rocstor drives are factory formatted with FAT32. WARNING: Formatting and Partitioning the Eagleroc Drive will destroy all of its data. To protect your data, back it up before formatting or partitioning this device. IMPORTANT NOTES: 1. All programs should be closed before beginning. 2. Connect the Rocstor hard disk drive adaptor to the drive and the other end plug into electricity. 3.
DIFFERENT WAYS TO GET TO THE CONTROL PANEL: (You may use any one of the following methods) 1. If the icon “My Computer” shows on your desktop, click or double click on the icon. Under “Other Places” click on “Control Panel.” Under Windows XP under Vista OS 2. If the icon “My Computer” does not show on your desktop, click on the Start icon on the lower left of your screen. If the Control Panel link is displayed, click on the Control Panel link.
3. If the icon “My Computer” does not show on your desktop, click on the Start icon on the lower left of your screen. If the Control Panel link is not displayed, click on the Settings link and then click on the Control Panel link. 4. Click on the Start icon on the lower left of your screen. Click on Run. Delete anything listed in the Open window. Type the following: compmgmt.msc and then click OK. Skip to INSTRUCTION # 4 (Instructions for Partitioning and Formatting from FAT 32 to NTFS {page 24}).
INSTRUCTIONS UPON REACHING CONTROL PANEL a. After reaching the Control Panel, click on Administrative Tools. b. After reaching Administrative Tools, click on Computer Management. c. After reaching Computer Management, click on Disk Management.
INSTRUCTIONS FOR PARTITIONING AND FORMATTING FROM FAT32 to NTFS 1. In the “Disk Management” window, right click the Rocstor drive in the upper portion of the menu to highlight it. In the drop down menu, select “Delete Partition.” WARNING: Formatting and Partitioning the Eagleroc Drive will destroy all of its data. To protect your data, back it up before formatting or partitioning this device. 2. The next window is “Delete primary partition.” Click on Yes. 3.
4. The Rocstor drive will show up in the lower menu as an “Unallocated” disk. 5. Right click anywhere in the “Unallocated” disk area in the lower menu. 6. Click on “New Partition.” 7. You are taken to “Welcome to the New Partition Wizard.” Click “Next”.
8. Click on “Primary partition” (it should be selected as the default partition). Click “Next”.
9. Under “Specific Partition Size,” click Next to accept the default setting, which is the maximum size allowed. 10. Under “Assign Drive Letter or Path,” accept the default letter and click “Next”.
11. In the “Format Partition,” accept the default setting. 12. The “Volume label” can be changed to any name up to 11 characters. 13. Suggest that “Quick Format” be selected and then click “Next”. 14. You now reached the “Completing the New Partition Wizard” screen. It displays the various settings you previously selected. If you are satisfied with your selections, click “Finish” to complete the new formatting. At this time the Rocstor disk drive is being formatted, which may take a few minutes.
15. You will return automatically to the “Disk Management” window and will see the newly formatted Rocstor disk on the screen with the name you selected. If no new name was entered in the “Volume label,” the Rocstor drive will show up as “New Volume.” To rename the volume at this time, right click “New Volume” and click “Properties.” You can now change the volume name up to 11 characters. Click OK.
16. You can also change the name at any time in the future by reaching the “Properties” menu of the Rocstor drive. 17. You can now Exit or close to return to the desktop.
Troubleshooting Rocstor data storage products are subjected to several quality control tests before leaving our factory. However, from time to time, the product may not work after shipment or would experience intermittent problems under certain criteria and/or situations. Should you experience a problem with your Eagleroc HD, please review the Manual and read the possible solutions that fit your problem. (The User Manual is updated regularly so check the Rocstor website for an updated Manual).
• Have you checked to confirm that the computer’s operating system works with the file system? • Review the manual that came with your computer to ensure that the file system is compatible with the operating system. Problem: The Eagleroc drive is not working fast enough. Solution: • You may have too many devices connected to your computer (such as Laptop computers.) Disconnect some devices and observe if there is an improvement in performance.
Troubleshooting for PC WINDOWS based computers Problem: The computer does not appear to recognize the drive. Solutions: • A window should appear, notifying you that a device is connected and/or the Eagleroc HD icon should appear on the “My Computer” folder. • Your computer’s Minimum requirements may not meet the minimum system requirements as indicated in this Manual.
• USB ports come in different speeds from 12Mbits/ s to 480MBits/s. USB 2.0 is a High-Speed connection. If the Eagleroc HD is connected to a USB 1.1 port (low speed) or hub, the drive will work slower than if connected to a USB 2.0 port or hub. Problem: There is no increase in performance when the Eagleroc drive is connected via the USB cable to a USB 2.0 port. Solution: • Ensure that the USB 2.0 drivers for the host bus and device have been properly and securely installed.
KNOWLEDGE BASE Eagleroc E3 Unique Features • Stylish design with optional color cover (Charcoal Black, Yellow, Silver/Gray and Red) U.S.A. and International: small Auto-Switch adaptor 220/110V Power Supply. • • Place Horizontally or Vertically Stylish Vertical Base • The state of the art casing is designed and engineered to maximize heat dissipation. • The Fan-less enclosure significantly reduces noise and vibration. The case should be in an open environment to permit air to flow around the drive.
Specifications • Dimensions: ~1.5 x 5.3 x 8.5 inches (3.7 x 13.5 x 21.5 cm) • Weight: ~ 2.5 Lbs (1Kilogram) • Transfer rates: USB 2.0 up to 480 Mbits/s; or USB 1.1 up to 12 Mbits/s.
Introductions: Interfaces (ports) and Cables FireWire is Apple Inc.’s brand name for the IEEE 1394 interface (although the 1394 standard also defines a backplane interface). FireWire is also known as i.LINK (Sony’s name) and DV (Panasonic’s Panasonic’s name, not to be confused with DV camcorder tapes). It is a serial bus interface standard for high-speed speed communi communications and isochronous real-time time data transfer, frequently used in a personal computer and digital audio / digital video.
FireWire 800 (IEEE 1394b) 9-pin pin FireWire 800/3200 (IEEE 1394b) connector was introduced commercially by Apple in 2003. This newer 1394 specification (1394b)) and corresponding products allow a transfer rate of 786.432 Mbits/sec full-duplex duplex via a new encoding scheme termed beta mode. It is backwards compatible to the slower rates and 6-pin connectors of FireWire 400.
Universal Serial Bus (USB) is a serial bus standard to interface devices. USB was designed to allow peripherals to be connected using a single standardized interface socket and to improve Plug Plug-and-play capabilities by allowing devicess to be connected and disconnected without rebooting the computer (hot-swapping) swapping).
Serial Advanced Technology Attachment (SATA) is a computer bus primarily designed for transfer of data between a computer and storage devices (like hard disk drives or optical drives). The main benefits are faster transfers, ability to remove or add devices while operating (hotswapping), thinner cables that let air cooling work more efficiently, and more reliable operation with tighter data integrity checks than the older Parallel ATA interface. SATA 1.
Compassion Chart: SAS eSATA SATA 300 SATA 150 PATA (133) FireWire 3200 FireWire 800 FireWire 400 USB 2.0 USB 3.0 Ultra -320 SCSI Fiber Channel Over Copper Cable Fiber Channel Over Fiber Infiniband 12x quad-rate Raw Bandwidth Transfer Speed (Mbits/s) (Mbits/s) Max. Cable Length Feet (meters) Power Provided 3000 3000 3000 1500 1064 3144 786 393 480 4800 2560 375 375 375 187.5 133 393 98.25 49.13 60 600 320 26 Ft (8 m) 6.5 Ft (2 m) 3.3 Ft (1 m) 3.3 Ft (1 m) 18 inches (0.
Introductions: Formatting File Allocation Table (FAT) FAT is a file system developed by Microsoft for MS-DOS and is the primary file system for consumer versions of Microsoft Windows. The FAT file system is relatively uncomplicated and is supported by virtually all existing operating systems for personal computers.
HFS Plus or HFS+ This is a file system developed by Apple Inc. to replace their Hierarchical File System (HFS) as the primary file system used in Macintosh computers (or other systems running Mac OS). It is also one of the formats used by the iPod digital music player. HFS Plus is also referred to as Mac OS Extended (or, erroneously, “HFS Extended”), where its predecessor, HFS is also referred to as Mac OS Standard (or, erroneously, as “HFS Standard”).
LIMITED WARRANTY This Limited Warranty is provided by Rocstorage, Inc. (hereinafter: Rocstor) for all lines of products. General Terms EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, ROCSTOR MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ROCSTOR EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY.
YOU SHOULD MAKE PERIODIC BACKUP COPIES OF THE DATA STORED ON YOUR HARD DRIVE OR OTHER STORAGE DEVICES AS A PRECAUTION AGAINST POSSIBLE FAILURES, ALTERATION, OR LOSS OF THE DATA. BEFORE RETURNING ANY UNIT FOR SERVICE, BE SURE TO BACK UP DATA AND REMOVE ANY CONFIDENTIAL, PROPRIETARY, OR PERSONAL INFORMATION. ROCSTOR IS NOT RESPONSIBLE FOR DAMAGE TO OR LOSS OF ANY PROGRAMS, DATA, OR REMOVABLE STORAGE MEDIA.
MALFUNCTION IN CONDITIONS OF NORMAL USE. ROCSTOR IS NOT LIABILE FOR ANY DAMAGE TO ANY OTHER PRODUCT CONNECTED TO A ROCSTOR PRODUCT. Limitation on Consequential Damages ROCSTOR IS NOT LIABLE FOR ANY DAMAGES CAUSED BY THE PRODUCT OR THE FAILURE OF THE PRODUCT TO PERFORM, INCLUDING ANY LOST PROFITS OR SAVINGS OR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. ROCSTOR IS NOT LIABLE FOR ANY CLAIM MADE BY A THIRD PARTY OR MADE BY YOU FOR A THIRD PARTY.
Where available, the Rocstor Replaceable Parts program ships approved replacement parts directly to you to fulfill your warranty. This will save considerable repair time. After you call the Rocstor Technical Support Center at 888.877.8777 a replaceable part can be sent directly to you. Once the part arrives, call the Rocstor Technical Support Center. A technician will assist you over the phone to ensure that the installation is quick and easy.
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer “Rocstor” makes no representation or warranty as to the suitability or fitness of these devices for any specific application. Technical Support All Rocstor hard drives are backed by free telephone technical support for two (2) years from the date of purchase.
Trademarks Acknowledgements © 2010, Rocstorage, Inc; acknowledges the following trademarks for company names or products mentioned within the Rocstor site, portal pages and articles/text/manuals: Rocstor, Rocsecure and Rocpower are registered trademarks of Rocstorage, Inc. Rocpro, Rocport, Rocbit, Rocsafe … are the trademarks of Rocstorage, Inc. "store your future", "secure your future" and “power your future” are the slogan marks of Rocstorage, Inc.
Contact Information Corporate Headquarters 8130 Remmet Avenue Canoga Park, CA 91304-4129 Office: +1 (818) 449-2000 Fax: +1 (818) 884-8777 Email: info@Rocstor.com Technical Support / RMA Tel: (888) 877-7716 (USA and Canada) Tel: +1 (818) 449-2000 (Domestic and Internationals) Fax: +1 (818) 884-8777 Hours: 9:00 am - 5:00 pm PST Mon - Fri (excluding holidays) Email: support@Rocstor.com Sales Info Hours: 8:00 am - 5:00 pm PST Mon - Fri (excluding holidays) Email: sales@Rocstor.
Available in Silver/Gray, Yellow, Red, and Charcoal Black Thank you for purchasing Eagleroc E3. Rocstor Ver.
