M1-S Instruction Manual www.rodemic.
Introduction Thank you for choosing the microphone. M1-S live dynamic M1 has proven itself Since its launch the to be arguably the most robust live dynamic vocal microphone on the market. Combined with premium sound quality courtesy of its high-output neodymium capsule and feedback rejecting pick-up pattern, it’s not hard to see why the M1 has become the live mic of choice for countless performers and venues worldwide.
Specifications Acoustic Principle: Dynamic Polar Pattern: Cardioid (see graph) Frequency Range: 75Hz ~ 18,000Hz (see graph) Output Impedence: 320Ω Sensitivity: -56dB ± 2 dB re 1V/Pa (1.6mV @ 94 dB SPL) @ 1 kHz Output Connection: 3-pin XLR balanced output between pin 2(+), pin 3(-) and pin 1 (ground) Net Weight: 360g Dimensions: Length: 171mm (6.73”) Width: 51.5mm (2.
Specifications Frequency Response Polar Response Accessories RM1 stand mount (with thread adaptor), ZP1 zip pouch, M3 screw and flat screwdriver -4-
Features • Live dynamic vocal microphone • High output neodymium capsule • Locking on/off switch • Gold plated XLR connectors • Heavy duty metal body • Feedback rejecting pick-up pattern • Ten Year warranty* Using the M1-S • The M1-S comes complete with a microphone stand-mount (RM1). This should be used to attach the microphone to a good quality stand. The stand-mount includes a thread adaptor allowing connection to either 3/8” or 5/8” stand thread.
Using the M1-S • Microphone technique, or how to get the sound you want, requires experimentation. We suggest that you start with the channel EQ set to ‘OFF’ or ‘FLAT’ (no boost or cut). • The M1-S’s primary function is a live vocal microphone. When setting it up on stage, make sure the foldback monitors are positioned as pictured here. This will direct the sound to the vocalist/ presenter and towards the least responsive section of the M1-S’s pick up pattern.
Using the M1-S • The M1-S switch features a lock to prevent any chance of accidental disabling during performance. Position 1 Mic is off (unlocked) Position 2 Mic is on (unlocked) Position 3 Mic is on (locked) To lock the microphone on, simply rotate the small screw at the base of the switch to the horizontal position while it is in the ON position. Storage • After use the M1-S should be removed from its stand mount, wiped with a dry, soft cloth and placed in its protective zip pouch.
Warranty All microphones are warranted for one year from date of purchase. You can extend that to a full ten years if you register online at www.rodemic.com. The warranty covers parts and labour that may be required to repair the microphone during the warranty period. The warranty excludes defects caused by normal wear and tear, modification, shipping damage, or failure to use the microphone as per the instruction guide.
