Instruction Manual

- 6 -

• The NT6 is supplied with a selection of ﬁ ttings

and adaptors designed to ease positioning and

mounting. The NT6 head attaches to a 2-axis

swivel-mount that allows it to independently move

and lock in position.

• To further increase the versatility of the NT6, it

comes supplied with 2 threaded adaptors, a 1/4”

to 5/8” and a 1/4” to 3/8” that enable the capsule

assembly to be securely attached to a wide variety

of mic stands, tripods and boompoles.

• The larger Adaptor is the 1/4” to 5/8”. When

screwed into the base of the swivel mount it enable

the capsule assembly to be attached to a standard

5/8” thread found on microphone stands.

• The smaller 1/4” to 3/8” adaptor, when screwed

to the base of the swivel mount enables the head

assembly to be attached to a standard tripod or

boompole.

Mounting the NT6