Specs

Multi Powered 3/4” Condenser Microphone

• Large 1” (25mm) HF1 gold sputtered capsule

• Continuously variable polar pattern, from Omni to

Cardioid to Figure 8 controlled on the mic

• Continuously variable PAD and High-Pass Filter

• Ultra low noise, transformerless surface mount

circuitry

• Wide dynamic range

Acoustic Principle Pressure, Pressure gradient Directional Pattern Continuously variable multi

pattern - Omni, through

Cardioid to Figure 8

Frequency Range 20 Hz-20 kHz Sensitivity -36 dB re 1 Volt/Pascal (16 mV @

94 dB SPL) +/- 2 dB @ 1kHz

Output Impedence 200Ω Dimensions Length - 208mm (8.1889”)

Diameter - 55mm (2.1653”)

Output Connection 3 pin XLR, balanced output

between Pin 2 (+), Pin 3 (-)

and Pin 1 (ground)

Shipping Weight 2.6kg

Net Weight 831g

• High strength welded and heat treated steel mesh head

• Internal capsule shock mounting

• Designed and manufactured in Australia

• Full 10 year warranty*

NT2000

Seamlessly Variable Dual 1” Condenser Microphone

Features

Speciﬁ cations

Frequency Response

Polar Pattern

Included Accessories

*After online registration

Australia

107 Carnarvon st, Silverwater NSW 2128 Australia

Ph: +61 2 9648 5855 Fx: +61 2 9648 2455

USA

PO Box 4189 Santa Barbara CA 93140 USA

Ph: +1 805 566 7777 Fx: +1 805 566 0071

www.rodemic.com

• RC1 case

• SM2 shock mount

PAGE 1
NT2000 M3 Seamlessly Variable Dual 1” Condenser Microphone Multi Powered 3/4” Condenser Microphone Features • Large 1” (25mm) HF1 gold sputtered capsule • High strength welded and heat treated steel mesh head • Continuously variable polar pattern, from Omni to • Internal capsule shock mounting Cardioid to Figure 8 controlled on the mic • Designed and manufactured in Australia • Continuously variable PAD and High-Pass Filter • Full 10 year warranty* • Ultra low noise, transformerless surface mount circui