User Manual

FEATURES:
• Full (externally biased) Condenser
• Gold sputtered
1
/
2
” capsule
• Heavy duty satin-nickel-plated body
• Surface mount technology.
• Low noise
• Full frequency response
• Custom WS5 Wind Shield
• Custom RM5 Stand Mount
• Supplied as a matched pair in Custom Carry Case.
A
CCESSORIES INCLUDED:
• RM5 Stand Mount x 2 plus 3/8”x5/8” Thread Adaptor x 2
• WS5 Wind Shield x 2
• Custom Carry Case
1. The NT5 requires a power supply which for
optimum results should be a ‘P48’ standard,
48 Volt DC Supply.
Most professional mixing consoles have an
internal 48V supply; alternatively you can
purchase a separate supply. Ensure that the
power supply you use is a professional unit
that is operating correctly. Damage due to
connection of the NT5 to a faulty power
supply is not covered by guarantee.
2. The NT5’s come complete with a microphone
stand-mount (RM5). This should be used to
attach the microphone to a good quality
stand. The stand-mount includes a thread
adaptor allowing connection to either 3/8” or
5/8” stand thread.
3. When first connecting an NT5 to a mixing
console, we suggest that you have the gain
control adjusted to full attenuation.
4. Please make all cable connections before
applying power to the microphone, and never
remove the microphone cable while the power
is connected. Ensure that the microphone
cable is connected Pin2 +, Pin 3 – and Pin 1
Earth (Ground).
30368_RØDE NT5 booklet 18/6/02 12:51 PM Page 5