Data Sheet

NTG-2
AUSTRALIA
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: [phone] Fx: [phone]
USA
PO Box 91028, Long Beach CA 90809-1028
Ph: [phone] Fax: [phone]
Specifications
Features
Directional Condenser Microphone
Frequency ResponsePolar Pattern
• Broadcast sound quality
• Low noise circuitry
• Condenser transducer
• Rugged metal construction
• Two step High Pass Filter (Flat/80Hz)
• P48 phantom power or 1.5V AA battery option
• Low handling noise
• Low weight - 161g (5.17 oz.)
• Designed and manufactured in Australia
• Full 10 year warranty with online registration
280
22
Acoustic Principle Line Gradient
Directional Pattern Super-Cardioid
Frequency Range
20Hz ~ 20,000Hz
(selectable HPF@80Hz)
Sensitivity -36dB ±2dB re 1V/Pa @ 1kHz
Nominal Impedence
250Ω - phantom power
350Ω - battery power
Equivalent Noise
18dBA SPL
(A - weighted per IEC651)
Maximum Output
+6.9dBu
(@ 1% THD into 1kΩ)
Dynamic Range 113dB (per IEC651)
Maximum SPL
131dB (@ 1kHz, 1% THD into
1kΩ load)
Signal/Noise
76dB SPL
(A - weighted per IEC651)
Power Req.
48V Phantom Power or
1.5 AA battery
Dimensions
Length - 280mm
Diameter - 22mm
Output Connection
3 pin XLR, balanced output
between Pin 2 (+), Pin 3 (-) and
Pin 1 (ground)
Net Weight 161g
dB re 1 V/Pa
10
0
-10
-20
-30
-40
20Hz 100 1000 10 000 20 000
0˚
90˚ 270˚
180˚
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
+5.0
Frequency:
500 Hz:
1000 Hz:
4000 Hz:
–
–
–
Incl. Accessories
• WSVM wind shield
• ZP2 zip pouch
• RM5 mic clip