Specs

M3
Multi Powered 3/4” Condenser Microphone
• Large 1” (25mm) capsule with gold plated
diaphragm
• Class “A” valve circuitry
• Hand selected and graded 6922 twin-triode valve
• Dedicated power supply
• Internal capsule shock mounting
• High level of RF rejection
• Ultra low noise
• Wide dynamic range
• High strength heat treated steel mesh head
• Designed and manufactured in Australia
• Full 10 year warranty*
NTK
Multi Award Winning Class A Dual 1” Condenser Microphone
Features
Specifi cations
Frequency Response Polar Pattern
Included Accessories
*After online registration
Australia
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: [phone] Fx: [phone]
USA
PO Box 4189 Santa Barbara CA 93140 USA
Ph: [phone] Fx: [phone]
www.rodemic.com
• RM2 stand mount
• RC2 case
• Transformer and lead
`ÊÀiÊ£Ê6É*>
ÊÓä
棊
Êä
Ê £ä
Ê Óä
Ê Îä
ÊÓäâÊ £ääÊ £äääÊ £äÊäääÊ ÓäÊäää
äÂ
ä ÓÇäÂ
£näÂ
Ó°ä
Óä°ä
Ê£ä°äÊÊ
ä°ä
Ó°ä
{°ä
È°ä
n°ä
£ä°ä
£Ó°ä
£{°ä
£È°ä
£n°ä
Óä°ä
ÓÓ°ä
Ó{°ä
Óx°ä
`ÊÀi°Ê£6É*>
³x°ä
ÀiµÕiVÞ\
Ê xääÊâ\
£äääÊâ\
{äääÊâ\
–
–
–
Acoustic Principle Pressure gradient Directional Pattern Cardioid
Frequency Range 20Hz ~ 20,000Hz Sensitivity -38dB ±2dB re 1V/Pa
(12mV @ 94 dB SPL) @ 1kHz
Nominal Impedence 200Ω Equivalent Noise 12dBA SPL
(A - weighted per IEC651)
Maximum Output +29dBu
(@ 1% THD into 1kΩ)
Dynamic Range >147dB (per IEC651)
Maximum SPL >158dB (@ 1kHz, 1% THD
into 1kΩ load)
Signal/Noise >82dB SPL
(A - weighted per IEC651)
Power Req. Dedicated Power Supply
(100 ~ 120V/200 ~ 240V,
50/60 Hz)
Dimensions Length - 208mm
Diameter - 55mm
Output Connection 3 pin XLR, balanced
output between Pin 2 (+),
Pin 3 (-) and Pin 1 (ground)
Shipping Weight 7.08kg
Net Weight 760g