M1 Instruction Manual www.rodemic.
Specifications Acoustic Principle: Dynamic Polar Pattern: Cardioid (see graph below) Frequency Range: 75Hz ~ 18,000Hz (see graph below) Output Impedence: 320Ω Sensitivity: -56dB ± 2 dB re 1V/Pa (1.6mV @ 94 dB SPL) @ 1 kHz Output Connection: 3-pin XLR balanced output between pin 2(+), pin 3(-) and pin 1 (ground) Net Weight: 360g (0.79lb) Packed Weight: 700g (1.54lb) Dimensions: Length: 171mm (6.73”) Width: 51.5mm (2.
Using the M1 • The M1’s primary function is a live vocal microphone. When setting it up on stage, make sure the foldback monitors are positioned as pictured. This will direct the sound to the vocalist and towards the least responsive section of the M1’s pick up pattern. • To ensure the lowest noise/distortion your mixer input gain control should be set so that the Peak Program indicator (PPI) LED flashes ON during peaks of the source (voice/instrument).
Warranty All microphones are warranted for one year from date of purchase. The M1 can be extended to a lifetime warranty if you register online at www.rodemic.com. The warranty covers parts and labour that may be required to repair the microphone during the warranty period. The warranty excludes defects caused by normal wear and tear, modification, shipping damage, or failure to use the microphone as per the instruction guide.