Datasheet

AUSTRALIA
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: [phone] Fx: [phone]
USA
PO Box 91028, Long Beach CA 90809-1028
Ph: [phone] Fax: [phone]
Specifications
Features
Active Ribbon Microphone
Frequency ResponsePolar Pattern
• Highly sensitive 1.8 micron ribbon element
• Bi-Directional Polar Pattern
• Internal Shock Mounting System
• Custom designed and manufactured transformer
• Heavy-dutymatteblacknish
• Ribbon-securing travel screw supplied
• Designed and manufactured in Australia
• One free ribbon replacement during warranty period
• Free 10 year extended warranty when you register
online at www.rode.com/warranty
216mm
65mm
Acoustic Principle Velocity transducer
Active Electronics
Step-up Transformer and
signal balanced preamp stage
Directional Pattern Figure 8
Frequency Range 20Hz ~20000 Hz
Output Impedance 200‡
Signal to noise Ratio 79.3dBA
Equivalent Noise 15 dbA SPL (as per IEC651)
Maximum SPL 130dB SPL
Maximum Output
8dBu (@ 1KHz, 1% THD into 1K
‡ load)
Sensitivity
-30.5 dB re 1V/Pa (30mV @
94dB SPL) ± 2dB @ 1kHz
Dynamic Range 115dB SPL
Power Requirements P48
Output Connection
3 Pin XLR - Balanced output
between Pin 2 (+) Pin 3 (-) and
Pin 1 (ground
Weight 1047g
0˚
90˚ 270˚
180˚
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
+5.0
Frequency:
1400 Hz:
500 Hz:
1000 Hz: