User Manual

Wireless Go User Guide V01 RØDE MICROPHONES – MAY 2019
TRANSMITTER – TX
Power Button
Press and hold the power button for 3
seconds to turn on the unit
Press and hold the power button for 3
seconds to turn off the unit
Single press to turn on when the device is in charging mode
Internal Microphone
The transmitter will use the internal microphone if
there is not an external microphone plugged in
On board processing optimised for the human voice
Audio Output
Standard 3.5mm TRS microphone input
Supplies 2.8V plugin power for compatible microphones
“Power” and “Link” LED’s
Power LED
Solid = internal battery is above 20%
Slow fl ash = internal battery is below 20%
Rapid fl ash = internal battery is below 10%
Double fl ash = Charging through USB (solid
when 100% charge is reached)
Link LED
Solid = Paired and transmitting to an RX
Slow fl ash = Not connected to the RX or out of range
Rapid fl ash = in pairing mode (will time out after 3 seconds)
Off = TX is in charging mode and not
transmitting to a reciever
USB-C
Standardised USB-C port
Used for charging with USB power supplies and is able
to connect to a computer for future fi rmware updates
The power LED will display charging mode if the
unit is plugged into power while off, a quick single
press the power button will turn on the TX
Inbuilt Microphone
LavMic input
Charge status
Connection status
USB-C
Power button