User Manual

rode.com
ACOUSTIC & ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Acoustic Principle: Pre-polarised pressure
transducer
Polar Pattern: Omnidirectional
Frequency Range: 50Hz – 20kHz
Maximum SPL (Mic): 100 dB SPL (1kHz @ 1m) dBu
Maximum Input Level
(3.5mm):
-20dBV
Microphone Preamp
Gain:
20dB
Equivalent Noise Level
(A-Weighted):
22dBA
Power Requirements: In-built rechargeable lithium-
ion battery charged via USB
5V, 0.3A
Operating Time: Up to 7 hours
Analog Inputs: 3.5mm TRS (lavalier
microphone input)
Analog Outputs: 3.5mm TRS
Transmission Range: 200m (line of sight)
Computer Connectivity: USB Type-C
Operating System
Requirements:
macOS 10.11 above
Windows 7 and above
Weight (grams): TX: 30g
RX: 32g
Dimensions
(millimetres):
TX
Length: 44
Width: 45.3
Height: 18.3
RX
Length: 44
Width: 45.5
Height: 18.3
Included Accessories: 3 x SC20
1 x SC5
3 x Furry
1 x Pouch Bag
• Dual channel wireless microphone system
• Series IV 2.4GHz digital transmission, 128-bit encryption
• 3.5mm TRS analog output, USB-C and iOS compatible digital audio output
• In-built rechargeable lithium-ion battery – up to 7 hours battery life
• Ability to switch between mono or stereo output
• 200m transmission range (line of sight)
The next generation of
wireless audio from RØDE
is here. Wireless GO II is
an extremely versatile and
ultra-compact dual channel
wireless microphone
system consisting of a
single receiver and two
transmitters. Featuring a
high-quality microphone built into each transmitter for completely wireless
operation, exible outputs for connecting to cameras, computers and
smartphones, extended transmission range and much more, Wireless GO II is
the perfect microphone for a wide range of content creation applications.
POLAR PATTERN FREQUENCY RESPONSE
RX
TX
Bottom view
Bottom view
Prole
18.5 mm
18.5 mm
Prole
46.4 mm
Top view
Top view
45.3 mm
44 mm
44 mm