Instruction manual

- 11 -
ADJUST THE HEIGHT OF THE HS1
To place the retainer at the ideal position just below and behind
the ear lobe, change the position of the retainer on the headband
wire. To re-position, loosen the retainer cap using the screwdriver
provided in your HS1 case. You will not need to unscrew the
retainer cap completely to allow movement. Once satisfi ed with the
height of the retainer on the headband, tighten the retainer cap
back in place.
FITTING YOUR HS1
- 11 -
Loosening the retainer cap with provided RØDE screwdriver
RETAINER CAP
117-950-3-1-HS1_manual.indd 11117-950-3-1-HS1_manual.indd 11 28/11/2012 3:48:10 PM28/11/2012 3:48:10 PM