Instruction manual

LEFT/RIGHT CONFIGURATION OF HS1
Depending on personal preference, the HS1 can sit at either the left
or right hand side of the mouth. To change left/right confi guration,
unscrew the retainer cap completely using the screwdriver
provided. (This is best done over a table or work surface to ensure
no parts are misplaced).
Ease the microphone to the left and right until it releases from the
headband wire completely.
On the opposite side of the headband, snap the microphone
into place, matching the curves of the inside of the retainer to the
shape of the headband wire. Return the retainer cap and screw
back into place.
FITTING YOUR HS1
- 14 -
Completely unscrew the retainer cap
RETAINER CAP
HEADBAND WIRE
RETAINER CURVE
117-950-3-1-HS1_manual.indd 14117-950-3-1-HS1_manual.indd 14 28/11/2012 3:48:11 PM28/11/2012 3:48:11 PM