User Manual

- 7 -
• After use the NT55 should be removed from its
stand mount, wiped with a dry, soft cloth and
placed in its protective case with the supplied
moisture-absorbent crystals.
• Be sure to place the moisture-absorbent crystals
(supplied) at the head of the microphone(s), so as
to absorb any moisture present.
Eventually this pack of crystals will need to be
dried. This is indicated by the crystals turning pink
in colour.
They can easily be re-used by placing them
in an oven at 100 - 150 degrees celsius for
approximately ten minutes. The crystals will
operate effectively again once they have turned
blue.
Storage
Powering the NT55
• For optimum performance the NT55 requires a
“P48” phantom power supply (48 Volt DC).
• Most professional mixing consoles have an
internal 48 V supply; alternatively you can
purchase a separate supply. Ensure that the
power supply you use is a professional unit that is
operating correctly.
• Damage resulting from the connection of the
NT55 to a faulty power supply is not covered by
the warranty.
052-950-2-2_NT55_Manual_small_size.indd 7052-950-2-2_NT55_Manual_small_size.indd 7 21/01/2010 2:13:19 PM21/01/2010 2:13:19 PM