Instruction manual

- 2 -

Introduction

We at RØDE would like to thank you and congratulate

you on investing in the RØDE NT6 Compact Condenser

Microphone with Detachable Capsule.

The RØDE NT6 is speciﬁ cally designed for difﬁ cult

mounting applications. Although clearly relevant to

instrument miking, the NT6 is extremely well suited

to any situation where a small and unobtrusive, yet

powerful microphone system is required.

The 1/2” (externally biased) gold sputtered capsule is

designed to attach to a custom made, multi-position

swivel mount allowing it to be independently positioned

with ease. The capsule is connected to the remote

pre-ampliﬁ er (body) by a custom 3m (10’) Kevlar

ﬁ bre

reinforced cable.

The surface-mount pre-ampliﬁ er circuit also

incorporates a two position variable PAD with 0 dB and

-10 dB attenuation, and a two position variable high-

pass ﬁ lter that enables you to step from a ﬂ at response

to 80Hz high pass ﬁ lter; both conveniently located away

from the capsule, providing additional control without

the need to move the capsule once in position.

The NT6 is intended for ﬁ lm, television, broadcast, live

performance, theatre, surround and environmental

recording applications, or wherever your imagination

takes you.

Please take the time to visit www.rodemic.com and

While there you can view studio tips and techniques, as

well as browse the comprehensive range of accessories

for RØDE microphones.

Peter Freedman

Microphones

Sydney, Australia