Instruction manual
- 7 -
Mounting the NT6
• With the capsule securely in position, you are
ready to connect and position the pre-amplifi er
(body) as required. Like the head, the pre-amplifi er
is designed to be positioned and/or mounted in
several ways.
• The NT6 comes complete with an RM5 Stand
Mount. When connected to a mic stand the RM5
securely holds the pre-amplifi er in position. This
allows the head assembly to be directly suspended
from or positioned independently to that of the
pre-amplifi er.
• As long as the pre-amplifi er is suitably protected
from the elements it can be positioned as required.
• As with any recording set-up it is best to explore
the options you have available and use the product
within these constraints.