manual

ManualsBrandsRode ManualsMicrophonesVideoMic Rycote

VideoMic

Parts Guide

Mic Controls

quickstart

guide

VideoMic

www.rodemic.com

1. Foam windshield

2. Camera shoe mount

3. Battery cover

4. PAD switch (inside battery compartment)

warranty.rodemic.com/videomic

Scan the QR code to

Don’t FORGET

to register for your

FREE ten year warranty!

The RØDE VideoMic

features an integrated

shock mount based on Rycote

Lyre

technology.

Constructed from a single piece of hard-wearing

thermoplastic, the Lyre

provides superior acoustic

suspension to traditional elastic solutions,

and will never wear out, sag or snap.

RØDE SOUNDBOOTH

now for Broadcast mics

Hear and compare RØDE microphones

at www.rodemic.com/soundbooth or on your iPad

5. LED power indicator

6. Power and HPF switch

7. Integrated Rycote

Lyre

suspension

8. 3.5mm dual mono output cable

The High Pass Filter (HPF ) is a low frequency cut-off setting, which you can use

to remove rumble, camera noise or other low frequency noise while recording.

Mic ON

using High Pass Filter

Mic ON

Flat setting

Battery OFF

Mic mute

LED power

indicator

028_952_1_Videomic_Quickstart.indd 1028_952_1_Videomic_Quickstart.indd 1 17/12/2012 8:45:19 AM17/12/2012 8:45:19 AM

Summary of content (2 pages)

PAGE 1
VideoMic TM quickstart guide VideoMicTM Parts Guide 7 RØDE SOUNDBOOTH now for Broadcast mics 6 Hear and compare RØDE microphones at www.rodemic.com/soundbooth or on your iPad® 8 1. 2. 3. 4. Foam windshield Camera shoe mount Battery cover PAD switch (inside battery compartment) 5. 6. 7. 8. LED power indicator Power and HPF switch Integrated Rycote® Lyre® suspension 3.
PAGE 2
mounting to camera 1 2 1. Turn the tightening ring counterclockwise to loosen the camera shoe connection, before attaching to camera. 3 2. Slide the camera-shoe into place on the camera mount. When the mic is in place, secure it by gently tightening the ring clockwise. 3. Connect the VideoMic’s audio lead to the camera’s “Audio In” or “Mic” socket, and secure the cable in place using the in-built cable clips (see below).