Manualshelf

Installation Manual

ManualsBrandsROFAVEZCO ManualsComputers & AccessoriesHDMI Extender 4K 60Hz (4:4:4 8bit) HDR10 18Gbps - 230ft 1080P,130ft 4K by Cat5e Cat6 No Lag,Two Way PoE+IR+CEC, DTS:X, HDCP2.2 HDMI Over cat6 Scaler,Slim Mini Case
123
4-3 Make sure the two connectors of one CatX cable are same standard (EIA/TIA
568B).
5. Compatibility: Please test other source and display devices to determine whether
it is a compatibility issue.
6. IR SIGNAL: Make sure the IR cables are correctly installed according to below
diagram.(IR Bi-directional Control)
6-1 Check if the IR emitter head is secured over the center of the IR window of
source device. This position maybe discrepant if you use different sources, try to
adjust the position if the signal is weak. (or you can refer to the user manual of your
source device to confirm the exact position of IR window )
6-2 Pay attention to the control angle and distance as below :The control signal will
be better when your controller is pointed at the IR receiver head directly.
NOTES:
Please use this machine based on below instructions to keep longer lifetime.
1. Before power on, please check the connection cable carefully. And make sure that