User Manual

USER MANUAL
USB2.0 Extender 50m
EZ-EX50-USB
Make installation easy
Physical interface diagram
Transmitter
Receiver
Connection and operation
Installation Instructions
During installation, connect or disconnect the cables gently.
Video conference system:
STATUS POWER
1 2
USB HOST UTP OUT
1 2
1 2 3 4
POWER
UTP INDC/5V
STATUS
USB1/2 USB3/4
Introduction
The EZ-EX50-USB is a USB 2.0 extender, slim and mini transmitter (TX) receiver (RX) pair that can
extend a USB signal up to 50m via CatX cable. The built-in USB HUB in the RX supports up to 4 USB
2.0 ports. The TX can be powered by the host such as a PC. Only one 5 Voltage low power
consumption at RX side.
产品图片
Features:
 Supports high-speed USB 2.0 (Up to 480Mbps) over Cat5e/Cat6 cable up to 50m (165 ft)
 4 x USB device connections supported by the Hub
 TX powered by USB port, RX powered by DC 5V supply with 1000mA to each USB device
 True plug-and-play, 100% hardware solution with no driver installation required
 Supports all major operating systems: Windows, MacOS and Linux
 Compatible with USB 1.1 and USB peripherals
 Mounting Ear, Hook & Loop, cable tie, assist you with easier installation
 Built-in ESD Protection, and free customer service.
Specifications
I/O Connections TX
1 x USB Type-B 1 x UTP Out
I/O Connections RX
1 x UTP IN 1 x DC 5V IN 4 x USB2.0
Power adapter
DC:5V/3A
Power consumption
4W pair
Size(L-W-H)
165*80*21mm
Weight
450g x 2
Operating Temperature/Humidity
0℃-70℃/10%-80%RH(no condensation)
Storage Temperature/Humidity
-10℃-80℃/5%-90%RH(no condensation)
58*53*22 mm
100g x 2 mm