Installation Manual

EZ-SP12H2 Firmware Upgrade Guide Map
Please download SP12H2 firmware file <EZ-SP12H2 update and setting > on easycoolav
com web, then follow up below guide map.
1. Please open Document Video guide > EZ-SP12H2 Firmware Update on PC
2. Then watch above video again and follow it to Open the <PortHelper.exe> to check
which firmware/program should be used.
3. After confirm the program. Please press and hold the <UPDATE> button, then power on
the splitter, it will going to upgrade mode.
Please refer to the video--<operations on splitter> to learn how to go into upgrade mode.
4. After the device is recognized, OPEN and select correctly firmware file at below
Document.
Please check EZ-SP12H2 Firmware Release List firstly, and select correct firmware based on
your demand.
Any question, please get factory technical support on easycoolav web freely, or ezcoousa
at hot mail..

Summary of content (1 pages)