User guide

ManualsBrandsRogue Engineering ManualsAccessories for electricalROGUE TERRAIN

ROGUE TERRAIN

OFF GRID POWER SUPPLY ENCLOSURE

Installation and Operation Guide

Overview .....................................................2

Device Options ...............................................3

Installation .....................................................4

External Power Wiring ..........................................4

Power Wiring Test .............................................5

Specications .................................................6

Wiring Diagram ...............................................7

Interior Pictorial ...............................................8

3860 S. Jason Street

Englewood Colorado 80110

www.rogue-engr.com

Toll Free 1-800-364-0659

Phone 303-734-0706

Fax 303-734-0517

Summary of content (8 pages)

PAGE 1
ROGUE TERRAIN OFF GRID POWER SUPPLY ENCLOSURE Installation and Operation Guide Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
ROGUE TERRAIN OFF GRID POWER SUPPLY ENCLOSURE OVERVIEW The Rogue Terrain packaged charge controller consists of a powder-coated steel equipment enclosure with a hinged latching cover that includes a Rogue Engineering 5 Amp or 10 Amp solar battery charger, an optional 15 Amp Low Voltage Disconnect (LVD) device, mounting space and a retainer for a customer-provided 12 Volt 12 Amp Hour (AH) battery and associated fuse and wiring distribution blocks.
PAGE 3
DEVICE OPTIONS: The Rogue Terrain series includes four unique models: – Rogue Terrain 500 – Rogue Terrain 515 – Rogue Terrain 1000 – Rogue Terrain 1015 The four models are characterized as follows: Top Level Part Number Description Extended Description Charger Type Charger Rogue Part Number 1950-273 ROGUE TERRAIN 500Rogue Enclosure w/5A Charger 1950-136, NO LVD 5A 1950-136 NO LVD N/A 1950-274 ROGUE TERRAIN 515Rogue Enclosure w/15A LVD 1950-136, & 5A 1950-222 1950-136 15A 1950222 1950-275 RO
PAGE 4
INSTALLATION The Rogue Terrain enclosure may be wall mounted or pole mounted. If wall mounted the device shall be secured to the wall utilizing appropriate customer-provided mounting apparatus. If pole mounted, the slots in the flanges at the top and bottom of the enclosure will accommodate a variety of sizes of U-bolts that may be used with a round pole. EXTERNAL POWER WIRING Ensure that the Battery, Solar and Load fuses are removed from the corresponding three black DIN mounted fuseholders.
PAGE 5
POWER WIRING TEST Replace the Load fuse in the Load fuseholder. Replace the Solar fuse in the Solar fuseholder. Replace the Battery fuse in the Battery fuseholder. With a multimeter set to a voltage scale that will accommodate 12 VDC, measure the voltage across the bottom screws of the Battery (+) and Battery (-) terminals. Then measure the voltage across the Battery and Ground terminals on the green connector on the left side of the charge controller. The voltage levels should be the same.
PAGE 6
SPECIFICATIONS CHARGE CONTROLLER – 5 AMP VERSION Battery Voltage: 12 VDC Maximum Load Current: 5 Amps Self-Consumption: Not Charging ~400 uA Charging ~2 mA Fast / Compensation Mode ON Voltage: ~12.8 VDC Fast / Compensation Mode OFF Voltage: ~14.7 VDC Float Mode Voltage: ~14.1 VDC Temperature Compensation: -3.3mV/ Degree C. / Cell Operating Temperature: -40 Degrees C. to +60 Degrees C.
PAGE 7
WIRING DIAGRAM AND INTERIOR PICTORIAL ROGUE TERRAIN OFF GRID POWER SUPPLY ENCLOSURE 7
PAGE 8
ROGUE TERRAIN OFF GRID POWER SUPPLY ENCLOSURE