Specifications

Measuring with Transducer Factors R&S FSH
1145.5973.12 4.120 E-10
Operating sequence:
¾ Press the MEAS key.
¾ Press the TRANSDUCER softkey.
The softkey menu for operation of transducer factors is
displayed on the screen.
N.B : Transducer factors are not available for
measurements with the tracking generator
and the Power Sensor R&S FSH-Z1. The
TRANSDUCER softkey is therefore
interactive.
Two transducer factors can be switched on with the
TRANSD and TRANSD dB softkeys. With EXIT the
transducer menu can be quit; with TRD'S OFF all
transducer factors can be switched off.
¾ Press the TRANSD softkey.
The R&S FSH displays a list of transducer factors
available in the unit. The cursor is on the active
transducer factor (line highlighted). If no transducer is
active, the cursor is on the first item in the list.
¾ Select the desired transducer factor with the rotary
knob or the cursor keys and switch it on with the
SELECT softkey.
¾ Switch off an active transducer factor with the
TRANSD OFF softkey
or
¾ Quit the transducer menu with the EXIT softkey.
When LIST->PRINTER is pressed, the R&S FSH outputs the list of transducer factors to a printer.