User manual

Multimeter Measurements
R&S
®
Scope Rider RTH
109User Manual 1326.1578.02 ─ 04
Relative
Activates or deactivates relative measurement. If you activate this function, the cur-
rently measured value is taken as reference value. Instead of the bar graph, the refer-
ence value and the measured value are displayed. You can also set a desired value as
reference value, see "Reference / Reference Manual" on page 109.
You can also activate or deactivate relative measurement by pressing DMM REL.
1
= Reference value
2 = Actual value relative to reference value
Reference / Reference Manual
"Reference" activates or deactivates the setting of a manual reference value.
If active, enter the reference value in "Reference Manual".
Restart Test
Restarts the measurement.
RANGE / POS
In meter mode, the vertical RANGE and POS keys adjust the measurement range
DMM.
Remote command:
METer<m>:SENSe:RANGe on page 205
Digital Multimeter (R&S RTH1002)