User manual

Data Logging
R&S
®
Scope Rider RTH
110User Manual 1326.1578.02 ─ 04
6 Data Logging
The data logger records scope or meter data captured of up to 4 different measure-
ments. The logging can last up to 23 days. The records are displayed as an on-screen-
chart and can be stored in 10 different slots. Using the "Zoom" and "Cursor" functions,
logged data can be analyzed.
6.1 Accessing the Logger Mode
1. Press the MODE key.
2. Select "Logger".
The logger interface is displayed.
If a scope measurement or meter measurement is running, the logging is started
automatically when you enter the logger mode.
6.2 Logger Display
If you log data of scope measurements, you can log all active measurements at once.
The logger display shows all logs with latest results at a glance, or one log with latest
and statistical results.
Logger Display