User manual

Remote Control Commands
R&S
®
Scope Rider RTH
230User Manual 1326.1578.02 ─ 04
12.11 Instrument Settings
SYSTem:DATE..............................................................................................................230
SYSTem:TIME...............................................................................................................230
DISPlay:PERSistence[:TYPE]......................................................................................... 230
DISPlay:PERSistence:TIME............................................................................................231
DISPlay:CONTrast......................................................................................................... 231
DIAGnostic:SERVice:LCD:BRIGthness............................................................................ 231
SYSTem:DATE [<Year>], [<Month>], [<Day>]
SYSTem:DATE? [<Year>], [<Month>]
Sets the date on the instrument.
Parameters:
<Day> Range: 1 to 31
Increment: 1
*RST: 1
Parameters for setting and query:
<Year> Range: 2012 to 2099
Increment: 1
*RST: 2012
<Month> Range: 1 to 12
Increment: 1
*RST: 1
SYSTem:TIME [<Hours>], [<Minutes>], [<Seconds>]
SYSTem:TIME? [<Hours>], [<Minutes>]
Sets the time on the instrument.
Parameters:
<Seconds> Range: 0 to 59
Increment: 1
*RST: 1
Parameters for setting and query:
<Hours> Range: 0 to 24
Increment: 1
*RST: 1
<Minutes> Range: 0 to 59
Increment: 1
*RST: 1
DISPlay:PERSistence[:TYPE] <PersistenceType>
Defines how long every new data point remains on the screen.
Instrument Settings