Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
303Bedienhandbuch 1326.1578.03 ─ 10
CHANnel<m>:THReshold:USER..................................................................................... 306
CHANnel<m>:THReshold:THReshold?............................................................................ 306
CHANnel<m>:THReshold:FINDlevel................................................................................ 307
CHANnel<m>:STATe <State>
Switches the channel signal on or off.
Suffix:
<m>
.
1|2 (RTH1002) , 1..4 (RTH1004)
Parameter:
<State> ON | OFF
*RST: OFF
CHANnel<m>:SCALe <Scale>
Sets the vertical scale (vertical sensitivity) of the indicated waveform.
Suffix:
<m>
.
1|2 (RTH1002) , 1..4 (RTH1004)
Parameter:
<Scale> Scale value, given in Volts per division
Bereich: 2E-3 bis 100
Inkrement: 1E-3
*RST: 0.05
Std-einheit: V/div
CHANnel<m>:RANGe <Range>
Sets the voltage range across the 8 vertical divisions of the diagram. Use the com-
mand alternatively to CHANnel<m>:SCALe.
Suffix:
<m>
.
1|2 (RTH1002) , 1..4 (RTH1004)
Parameter:
<Range> Voltage range value
Bereich: 0 bis 800E+3
Inkrement: 10E-6
*RST: 0
Std-einheit: V
CHANnel<m>:POSition <Position>
Moves the selected signal up or down in the diagram. The position is a graphical set-
ting given in divisions, while the offset sets a voltage.
Suffix:
<m>
.
1|2 (RTH1002) , 1..4 (RTH1004)
Grundeinstellungen