Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
311Bedienhandbuch 1326.1578.03 ─ 10
TRIGger:HOLDoff:MODE................................................................................................312
TRIGger:HOLDoff:TIME..................................................................................................313
TRIGger:HOLDoff:EVENts.............................................................................................. 313
TRIGger:HOLDoff:MIN................................................................................................... 313
TRIGger:HOLDoff:MAX.................................................................................................. 313
TRIGger:MNR................................................................................................................314
TRIGger:MODE <Mode>
The trigger mode determines the behavior of the instrument if no trigger occurs, and
also the number of acquired waveforms when a trigger occurs.
Parameter:
<Mode> AUTO | NORMal | SINGle
AUTO
The instrument triggers repeatedly after a time interval if the trig-
ger conditions are not fulfilled. If a real trigger occurs, it takes
precedence.
NORMal
The instrument acquires waveforms continuously, each time
when a trigger occurs.
SINGle
When a trigger occurs, the instrument acquires one waveform.
*RST: AUTO
TRIGger:SOURce <Source>
Selects the trigger source, the waveform on which the trigger condition is checked.
Parameter:
<Source> C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7
Logic channels D0..D7 require option R&S RTH-B1. For video,
runt, slew rate and window trigger, only analog channels are
available.
*RST: C1
TRIGger:TYPE <Type>
Selects the trigger type, the event type that defines the trigger point.
Grundeinstellungen