Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentHandheld (scope-meter) RTH1012MSO 100 MHz 500 null 10 Bit
919293949596979899100
Waveform Setup
R&S
®
Scope Rider RTH
67User Manual 1326.1578.02 ─ 04
Remote command:
TRIGger:SPATtern:PATTern on page 183
Bit Order
Defines if the data words start with msb (most significant bit) or lsb (least significant
bit).
Remote command:
TRIGger:SPATtern:ORDer on page 183
2.5.12 Timeout Trigger (R&S RTH-K19)
The timeout trigger checks if the signal stays above or below the trigger level for a
specified time lapse. In other words, the trigger occurs if the signal does not cross the
trigger level during the specified time.
► SETUP key > "Trigger Type" = "Timeout"
Trigger