User manual
Waveform Analysis
R&S
®
Scope Rider RTH
84User Manual 1326.1578.02 ─ 04
Remote command:
CURSor:SCReen on page 192
3.4 Mathematics
A math waveform is a calculated waveform. You can calculate data out of one or two
different sources using several predefined operations.
► To configure the math waveform, long-press the MATH key.
► To activate or deactivate the last configured math waveform, press the MATH key.
► To adjust vertical scale and position of the math waveform, use the RANGE and
POS keys.
You can analyize math waveforms in the same way as channel waveforms: use zoom,
perform automatic and cursor measurements, save as reference waveform, and per-
form mask tests.
Description of settings
State
Activates the waveform and displays it.
Remote command:
REFCurve:STATe on page 196
CALCulate:MATH:STATe on page 195
Source 1 / Source 2
Sets the source(s) for the defined mathematic operation.
Operation
Select an operation to calculate the math waveform.
"S1 + S2"
Addition: Adds the values of "Source 1" and ""Source 2"".
Mathematics