User manual

Network Connections

R&S

Scope Rider RTH

153User Manual 1326.1578.02 ─ 04

11 Network Connections

This chapter describes the setup of network connections.

There are several ways to connect the R&S RTH to a computer:

●

Connect the instrument to a local area network (LAN), usually the company net-

work. For this connection, ethernet technology is used.

LAN connection is used for remote operation using the web interface option

R&S RTH-K201, for remote control using SCPI commands, and for data transfer.

●

Connect the instrument directly to a computer using USB.

The direct USB connection is used for remote control using SCPI commands.

●

Connect the instrument to the wireless LAN (requires option R&S RTH-K200).

You can operate the instrument remotely using a web browser on the computer or

mobile device.

11.1 LAN Connection

1. Connect the LAN cable to the LAN connector on the right panel of the instrument.

Press the

key.

3. Select "USB/LAN".

4. Select "Interface" = "Ethernet". By default, DHCP is used and all address informa-

tion is assigned automatically.

5. Note the IP address, which is required to address the instrument in the network.

LAN Connection