User manual

Network Connections
R&S
®
Scope Rider RTH
157User Manual 1326.1578.02 ─ 04
Wireless State
Enables or disables wireless LAN access.
Wireless Mode
Selects the wireless LAN function of the instrument. It can serve as access point or as
client.
SSID
Shows the wireless LAN identifier of the instrument. You can change the identifier.
Passphrase
Shows the wireless LAN password of the instrument. You can change the password.
Status / Connected
Shows the connection status.
Network SSID
Enter the SSID of the router to which you want to connect.
Network Passphrase
Enter the password of the router to which you want to connect.
Scan
Checks for available routers and access points.
MAC Address
Shows the media access control address (MAC address), a physical address and
unique identifier of the instrument.
11.4 Web Interface (Option R&S RTH-K201)
If the R&S RTH is connected to a computer via LAN or WLAN, you can operate the
instrument from the computer. No additional tools are required, you need only a web
browser that supports HTML5. Thus, you can use your smartphone or tablet to operate
the oscilloscope remotely.
1. Open a web browser on the computer or mobile device.
2. Type the instrument's host name or IP address in the address field of the browser,
for example, http://10.133.10.203.
The instrument's homepage is shown.
Using the web interface, you can:
●
Display a screenshot of the current instrument display.
●
Operate the instrument using the menus on the emulated display.
This view is designed for small devices, for example, smartphones.
●
Operate the instrument using the emulated front panel.
Web Interface (Option R&S RTH-K201)