User manual

Remote Control Commands
R&S
®
Scope Rider RTH
214User Manual 1326.1578.02 ─ 04
LOGGer:MEASurement<m>:TYPE?
Returns the measurement type of the selected measurement.
Suffix:
<m>
.
1..4
Return values:
<Type> See MEASurement<m>:TYPE on page 189.
Usage: Query only
LOGGer:MEASurement<m>:SOURce?
Returns the source channel of the selected measurement.
Suffix:
<m>
.
1..4
Return values:
<Source> C1 | C2 | C3 | C4 | M1 | R1 | XY | D0 | D1 | D2 | D3 | D4 | D5 |
D6 | D7
<Source2> C1 | C2 | C3 | C4 | M1 | R1 | XY | D0 | D1 | D2 | D3 | D4 | D5 |
D6 | D7
Usage: Query only
12.8 Protocol Analysis
● General Protocol Settings..................................................................................... 214
● I2C (Option R&S RTH-K1).................................................................................... 215
● SPI (Option R&S RTH-K1)....................................................................................222
● UART/RS-232/RS-422/RS-485 (Option R&S RTH-K2)........................................ 223
12.8.1 General Protocol Settings
BUS:FORMat <NumberFormat>
Sets the decoding format of the data.
Parameters:
<NumberFormat> BIN | OCT | DEC | HEX | ASCii
*RST: HEX
Protocol Analysis